Forum Discussion

jyoon7's avatar
jyoon7
Icon for New Contributor rankNew Contributor
8 years ago

How can i install the devices? (in Quartus II 13.0 sp1)

I downloaded install files like 'ModelSimSetup-13.0.1.232.exe' , 'QuartusSetupWeb-13.0.1.232.exe' and also 'cyclone_web-13.0.1.232.qdz' to use cyclone II device. And of course installed whole of the...
Vicky1's avatar
Vicky1
Icon for Regular Contributor rankRegular Contributor
8 years ago

Hi,

Launch the Device installer for Quartus 13.0.1.232 from Windows start menu & browse the appropriate folder for the devices to be installed Instead of quartus tool. If you tried from quartus tool you could have seen the below attached message.

it says Cyclon II/III/IV family devices are already installed.

If it is already installed then that devices will grade out like below,

check it & provide screen shot of it.

Let me know if this has helped resolve the issue you are facing or if you need any further assistance.

Best Regards

Vikas Jathar

(This message was posted on behalf of Intel Corporation)