Forum Discussion
m_kumar
Occasional Contributor
Occasional ContributorFIFO configuration and Read
Hi.
Can anyone help me how to configure the fifo in max10 for below requirement.
So i'm getting stream of rgb pixel data in single channel one by one each having 12 bit width and 300 depth. i wan...
RichardT_altera
Super Contributor
Super ContributorYou can use DCFIFO_MIXED_WIDTHS, but the FIFO width ratio is restricted by the type of RAM block (MAX10 M9k), and in general, are in the power of 2.
Reference: http://www.hlam.ece.ufl.edu/EEL4712/LectureNotes/MAX10-EmbeddedMemory.pdf#page=53
m_kumarOccasional Contributor
Occasional ContributorThank you sir.
