Forum Discussion

MWeng3's avatar
MWeng3
Icon for New Contributor rankNew Contributor
7 years ago

Design Space Explorer can't open .ip files

Error: Exploration Point DSpace12dec2018a_1 reported: Error opening /home/shared/DSE_25G/fpga_reader/hw/syn/top_s10/dse/DSpace12dec2018a/DSpace12dec2018a_1/shared/DSE_25G/fpga_reader/hw/des/altera_ip...
AnandRaj_S_Intel's avatar
AnandRaj_S_Intel
Icon for Regular Contributor rankRegular Contributor
7 years ago

Hi,

  1. Which Version & Edition of Quartus tool are you using?
  2. Can elaborate on the steps?

We have checked with Quartus 18.1 pro by opening project (.ip) and Started exploring the design with DSE II, by clicking on the Start which works fine.

If you are using old version of quartus try it by using latest version.

Just for information.

https://www.intel.com/content/altera-www/global/en_us/index/support/support-resources/design-examples/design-software/quartus-ii/exm-dse.html

Regards

Anand

MWeng3's avatar
MWeng3
Icon for New Contributor rankNew Contributor
7 years ago

am using Pro 18.1. I have PD with Pcie, custom rtl and many deaign ware components.

I compile/synthesize the design then switch to DSE in the gui. Seed sweep. Nothing unusual in how I set it up. Then press the start button. Thanks,

-mark