Forum Discussion

New Contributor

7 years ago

Constraints entry

Hello, This is my first time using the Intel forums, so go easy :) I have some experience with Quartus II but mainly older versions (9 and 13) but recently acquired a new license to 17.1. I am wo...

sstrell

Super Contributor

7 years ago

There's a number of ways to do this. You can simply open the .qsf file and copy, paste, and edit in a separate file. Then add "source <file name>" to the .qsf.

You can also go to the Project menu and select Generate Tcl File for Project.

See this training for details on Tcl in Quartus: https://www.intel.com/content/www/us/en/programmable/support/training/course/odsw1190.html

Forum Discussion

Constraints entry

Recent Discussions

Duplicate_hierarchy_depth / duplicate_register

Timing analysis - long combinational path

Automatically added negative node for TDS output doesn't work with Agilex 5

Quartus 20.1std compilation fails for Quartus map - Device 10AS057K2F40I1SG

QuartusPro 25.3 Crashed after using the Signal Tap Logic Analyzer