Forum Discussion
Altera_Forum
Honored Contributor
Honored Contributorconnecting to quartus
I use a STREAM board connected to a limemicro LMS7002 RF development board. The chip is an EP4CE40F23C7N, which is an FPGA board that can be programmed for RF communication with an RF board. I a...
Altera_ForumHonored Contributor
Honored Contributor --- Quote Start --- It has a 10pin altera jtag header. You need an altera usb blaster (or equivalent) hardware for programming the fpga. --- Quote End --- Am i have to use Jtag cable?
