Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
9 years ago

connecting to quartus

I use a STREAM board connected to a limemicro LMS7002 RF development board. The chip is an EP4CE40F23C7N, which is an FPGA board that can be programmed for RF communication with an RF board. I a...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
9 years ago

--- Quote Start ---

I can not find the hardware in the programmer menu in Quartus

--- Quote End ---

The STREAM board surely exposes a JTAG interface, either a 10 pin header to connect an Altera programming cable (USB Blaster) or more likely an in-built USB Blaster. Review the board documentation.