Forum Discussion

aejjeh's avatar
aejjeh
Icon for New Contributor rankNew Contributor
7 years ago
Solved

Case #: 00288368 - Unable to configure Arria 10 GX FPGA Development Kit for OpenCL

I am trying to configure our Intel Arria 10 GX FPGA Development Kit for use with the OpenCL SDK by following thefollowing guide. I am able to reach "Installing the OpenCL Runtime Driver - step 3". Ho...
SSFyTMT's avatar
SSFyTMT
Icon for New Contributor rankNew Contributor
7 years ago

@HRZ - The binary I'm using is from the a10_ref BSP design as described in AN807 https://www.intel.com/content/www/us/en/programmable/documentation/tgy1490191698959.html . It is provided as part of the Quartus/AOCL install. On my environment it is in intelFPGA_pro/17.1/hld/board/a10_ref/bringup.

Thanks for that command, I'll give it a shot.

I gave it a shot and created the .sof from the .aocx. I configured the FPGA via JTAG the same as in AN807, but replaced the top.sof that comes with the a10_ref BSP with the .sof created from boardtext.aocx (that also comes with the a10_ref BSP). No luck in getting the board to be recognized.