Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
15 years ago

Can't recognize silicon ID for device 1

Hello, - I build my own pcb with a Cyclone iii and an EPCS16S. - I designed the schematic as in the Cyclone III Device Handbook, Volume 1 (page 9-60, figure 9-30) using the AS configurati...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
15 years ago

Thanks for your reply,

I tried to send an *.jic file to the device (see picture), but than I get an Error: CONF_DONE pin failed to go high in device 1

Can it have something to do with the schematic? I set up the JTAG connector as an AS configuration device in my pcb.