Forum Discussion

Gyud0's avatar
Gyud0
Icon for Occasional Contributor rankOccasional Contributor
4 years ago

Can't erase/reprogram EPCQ Flash via Quartus Prime Programmer

Hey, I was successfully reprogram and erase a .JIC file to EPCQ MT25QL512 Flash device via Quartus Prime Programmer. The Flash is connected to Cyclone V device. After that, I accidently made a ....
YuanLi_S_Intel's avatar
YuanLi_S_Intel
Icon for Regular Contributor rankRegular Contributor
4 years ago

Hi, is the device part number selected in the quartus match with the hardware? Also, is the MSEL in AS mode?



  • Gyud0's avatar
    Gyud0
    Icon for Occasional Contributor rankOccasional Contributor
    4 years ago

    Yes, the Device is match with the hardware. The MSEL pins as well.

    The Quartus project setting and the MSEL pins keep unchanged. The only changed was the start address of the .sof