Forum Discussion

Gyud0's avatar
Gyud0
Icon for Occasional Contributor rankOccasional Contributor
4 years ago

Can't erase/reprogram EPCQ Flash via Quartus Prime Programmer

Hey, I was successfully reprogram and erase a .JIC file to EPCQ MT25QL512 Flash device via Quartus Prime Programmer. The Flash is connected to Cyclone V device. After that, I accidently made a ....
YuanLi_S_Intel's avatar
YuanLi_S_Intel
Icon for Regular Contributor rankRegular Contributor
4 years ago

Hi, any idea what are the changes you made when creating the JIC file? Have you selected the correct device part number?


Also, can you try to program the known to work JIC into it?


Gyud0's avatar
Gyud0
Icon for Occasional Contributor rankOccasional Contributor
4 years ago

The Only change was that I placed the .sof (page_0) of the design in address different from 0x00000000.

I tried to program a valid .JIC file but it has been stopped at 53% and I got the error "can't recognized silicon ID for device 1.......".