Forum Discussion
New ContributorCannot proceed because MSVCR120.dll was not found
Please check that the LM_LICENSE_FILE is directed to a license file. Modelsim Intel Edition required a license.
How to set LM_LICENSE_FILE:
In the command prompt:
setx LM_LICENSE_FILE <license file path>example: C:\intelFPGA_pro\21.1\license.dat
Best Regards,
Richard Tan
p/s: If any answer from the community or Intel support are helpful, please feel free to give Kudos.
Super ContributorYou may checkout the link below for the solution.
Let me know if it helps.
Best Regards,
Richard Tan
p/s: If any answer from the community or Intel support are helpful, please feel free to give Kudos.
New ContributorThanks for your response.
I found the dll file and replaced it with new one but again i am getting same error.
Please provide other possibilities to try and solve the problem.
Thanks
MuralikumarM
- RichardT_altera
Do you download the Modelsim installer from our Download Center for FPGAs?
https://www.intel.com/content/www/us/en/programmable/downloads/download-center.html
Try to uninstall the current Modelsim and install the Modelsim - Intel FPGA edition.
Let me know if the issue persists.
Best Regards,
Richard Tan
p/s: If any answer from the community or Intel support are helpful, please feel free to give Kudos. - RichardT_altera
You may checkout the below link for the solutions that might helps to solve the issue.
Best Regards,
Richard Tan
p/s: If any answer from the community or Intel support are helpful, please feel free to give Kudos.- MuralikumarM
Hi,
all the things above given was tried and still the same error showing.
regards
MuralikumarM
- RichardT_altera
Hmm that's weird. Have you try to install in other machine and observe the same issue?
Could you share a screenshot of the shown error?
Best Regards,
Richard Tan
p/s: If any answer from the community or Intel support are helpful, please feel free to give Kudos.
