Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
8 years ago

Auto detect errors on Max 10 device

Hi, I would like to use Quartus II 17.1 to do the JTAG programming on MAX 10 Device - 10M08SCU169. I have discovered a problem with the error messages - "Unable to scan device chain. Can't...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
8 years ago

Hi,

Maybe HUB degrades the voltage requirement for jtag.

Probe the signal and check the voltages for both cases and find out the problem.

Best Regards,

Anand Raj Shankar

(This message was posted on behalf of Intel Corporation)