Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
11 years ago

Altera FPGA DE0 PWM LEDS

Hello everyone, I want to make PWM LEDS, i mean that pwm signal will control the intensity/brightness of the leds, such as this video: https://www.youtube.com/watch?v=83benzyirnq But how it c...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
11 years ago

Well PWM is the way to control the brightness. Basically you are flickering the LED on and off very fast; depending on the duty cycle the LED will appear to be brighter (long duty cycle) or dimmer (short duty cycle). 0% duty cycle = off, 100% duty cycle = always on = maximal brightness. Just pick a fast frequency to fool the eyes to not see flicker, but not too fast to allow for the LED to fully turn on - so like 1kHz would be ok.