Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
15 years ago

Using EPCS and CFI for booting - failure

Hi guys, I'm in a real trouble and now after 5 days still do not see any solution. The situation is that I have a an eval board from EVB with CIII. On the board there is an EPCS and a CFI flash...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
15 years ago

Yes I agree... Open SOPC builder, and in the CPU settings check the value of the reset vector. If it's on the EPCS controller, then the CPU will start a bootloader that will look for the application in the EPCS flash.