Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
10 years ago

TSE linux Could not find the PHY

Hello. I'm trying to use Marvell PHY on Aria II dev board with niosGen2 and linux 4.1. See attached for boot log and device tree Im try to add in device tree phy node or phy addres, but it not help...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
8 years ago

Hi there,

although this thread is quite old. I have a similar issue. I also want to use a tse in a linux enviroment (not uClinux). The connection is via pci

Regards

Chris