Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
9 years ago

terasic / Atlas-SoC Kit and Altera OpenCL compatibility

I apologize in advance if this has been asked before. Searched but found no answers. I bought the terasic / Atlas-SoC Kit. According to this document, it works with the OpenCL dev kit from A...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
9 years ago

--- Quote Start ---

Good effort, I am aware of those resource. Unfortunately neither of those show step by step example of how to program the Terasic Atlas SoC.

The support here is pretty aweful, and so is the support for these FPGA in general. I can't even get a straight forward answer on how to create a hello world program using OpenCL from Windows Altera tools. Most of these things assume the board is attached to the PCI bus on a computer. What if you have a laptop and a seperate computer like the Atlas SoC?

--- Quote End ---

You should feedback this to Altera via their support channel :)