Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
15 years ago

Programming second CPU

Hello I'm using a Cyclone III starter board and trying to build a system with 2 cpu's but can't get them to work together. I've got both in one SOPC system. CPU1 has a reset vector of ex...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
15 years ago

Thanks for your help everyone. I'm going to have another go at this today. I've actually managed to get it to work with a Cyclone II Starter Board. I did use two bsp's and programmed the flash twice rather than trying to write them at the same time. This worked.