Forum Discussion

BSui's avatar
BSui
Icon for New Contributor rankNew Contributor
7 years ago

Programming .jic to S25FL128S FLASH with Cyclone 10 LP device

At first, there was no problem when I downloaded my .jic file to S25FL128S. However, after operating the Flash through "Generic Serial Flash Interface Intel FPGA IP Core" (including writing and read...
Nooraini_Y_Intel's avatar
Nooraini_Y_Intel
Icon for Frequent Contributor rankFrequent Contributor
7 years ago

Hi Leo,

Did you try to turn on the "Unprotect EPCS/EPCQ devices selected for the erase/program operation" before programming the .jic file? Refer to the screen shot. Try to turn on this programmer option and then click.

Regards,

Nooraini