Forum Discussion
Altera_Forum
Honored Contributor
Honored ContributorProgram FPGA from EPCS, and boot Linux from SDCard?
Given a Cyclone V SoC (HPS) with a EPCS and SD-Card. Is it possible to setup FPGA to load config from EPCS, while booting Linux from the SD Card without reprogramming the FPGA?
Altera_ForumHonored Contributor
Honored ContributorYes.
You may want to have a look at [1]. [1] https://www.altera.com/content/dam/altera-www/global/en_us/pdfs/literature/hb/cyclone-v/cv_5400a.pdf
