Forum Discussion

AKusc1's avatar
AKusc1
Icon for New Contributor rankNew Contributor
7 years ago

Program Arria 10 from CFI flash

Hi. I have a dev kit DE5-NET (from terasic) with Arria 10 (10AX115). In my project I use PCIe hard IP. After I was download a firmware into CFI flash memory I power on a PC with FPGA board. In my P...
JohnT_Altera's avatar
JohnT_Altera
Icon for Regular Contributor rankRegular Contributor
7 years ago

Hi,

It looks like your Linux setup is not able to detect the FPGA during the initial power up boot is because the FPGA is not able to meet the PCIe wake up time. I would recommend you to use CvP in order to meet the PCIe wake up time​