Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
15 years ago

pausing target processor: not responding

hi all, i hav build a system in sopc builder using nios ii cpu, jtag_uart, esps_flash_controller, ddr_high_performance_memory_controller, tse_mac, sgdma_rx, sgdma_tx, flash_tristate_bridge, ext_f...
CGiur's avatar
CGiur
Icon for New Contributor rankNew Contributor
7 years ago

I know this is some 8 years late but just ran into it. In my case I hooked up a memory mapped slave (other than the internal bram) to the instruction master rather than data master of the nios2 in Qsys.