Forum Discussion
Altera_Forum
Honored Contributor
Honored Contributorpausing target processor: not responding
hi all, i hav build a system in sopc builder using nios ii cpu, jtag_uart, esps_flash_controller, ddr_high_performance_memory_controller, tse_mac, sgdma_rx, sgdma_tx, flash_tristate_bridge, ext_f...
Altera_ForumHonored Contributor
Honored Contributorhi,
these are the timing related warnings i am getting warning: 1.at least one of the filters had some problems and could not be matched. 2.the following clock transfers have no clock uncertainity assignment 3.critical warning: timing requirements not met. 4.critical warning: found minimum pulse width or period violations. see report minimum width for details. i dont know how to overcome these. sorry my questions may seem silly, but i cant help this is my first experiance with altera environment. am using cyclone iii dev board ( ep3c25f324c6). my mentor said it is some interrupt related error. is that the one causing problem...? thank you.
