Forum Discussion
Altera_Forum
Honored Contributor
Honored ContributorNo Ethernet with nios2 mmu stdandard design
Hello, I'm currently trying to build my own custom FPGA design. I'm using the Nios2 nios2_linux_3c120_125mhz example from Altera Wiki and also the design from Altera website nios2 mmu example desi...
Altera_ForumHonored Contributor
Honored ContributorActually, Ethernet is working with uClinux but not working with u-boot:
When the nios2_3c120_1258mhz_top.sof design is downloaded, U-boot start : U-Boot 2009.01 (Apr 25 2009 - 13:37:29) CPU : Nios-II SYSID : 0x45ff1c2a, Fri Jan 30 03:53:01 2009 BOARD : Altera 3C120 Net: board eth init Altera TSE init Marvell 88E1111S found tse0 Hit any key to stop autoboot: 0 ==> With my custom_fpga.sof, U-boot start U-Boot 2009.01 (Apr 25 2009 - 13:37:29) CPU : Nios-II SYSID Net: board eth init Altera TSE init Marvell 88E1111S found tse0 Hit any key to stop autoboot: 0 ==> Nothing after SYSID ? My SYSID in qsys is 0x0. Could it explain the fact that ping and dhcp don't work ?
