Nios II uClinux boot

Hi Great thanks for all your replies, I googled and youtubed a lot and found many tutorials but as i have a custom board none matched mine.

so i decided to start from ground following the tutorials, till now i have made the Qsys system,

good news i have 32MB on board RAM h57v2562gtr-75c

but i have a confusion : the cpu is 32bit, but my RAM has only 16bit data lines, will it be a problem??

for THE components please click on the following links of my google drive,

SYSTEM : https://drive.google.com/open?id=1z08pRWrfmOHU0ZU6KEM2lCVhZDHMowMP
CPU : https://drive.google.com/open?id=1al9st1mU9bCHLoddMTswu1tsU7brI0rE
SDRAM: https://drive.google.com/open?id=1YbV4rS3poOKPFLl8U3K18TYco3-hBmaz
SDRAM_TIMINGS: https://drive.google.com/open?id=1g8-zIl1-Eu-Z5eEvC7hqLkMjbba4ejHJ
JTAG: https://drive.google.com/open?id=1bkFR47tpzvqT8USkgIpQBZ_mfYWJb16c
TIMER: https://drive.google.com/open?id=16MxmKIm-wbB0OYv4ELiyM7DwVXUDCCxT
UART : https://drive.google.com/open?id=1pipQjNQl9QLCsmlObjdgqzyoIOd7gFXG
REPORT : https://drive.google.com/open?id=1bgGNpyV5zOp8XubkuXEujGm8xdT291tk

Please have a look on the above work and please check is it OK to move further ??

waiting for your reply,

thanks in advance

thanks