Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
14 years ago

Nios II Building Error

I got this error when building a Nios II project. Please help me fix it. :) alt_sys_init.c:(.text+0x8): warning: Error: Interrupt not connected for JTAG_UART. You have selected the interrup...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
14 years ago

As the error message suggests, either configure the BSP to use the small drivers so that you don't use interrupts, or go back to SOPC Builder / QSys and connect the JTAG Uart's interrupt port to the Nios CPU.