help!how to build uclinux on de2 in windows

While following all the steps on tryOutuClinux I am stuck at

make vendor_hwselect SYSPTF=/path_to/your_sytem.ptf

I can find

/opt/altera8.0/nios2eds/examples/verilog/niosII_cycloneII_2c35/full_featured/NiosII_?cycloneII_2c35_full_featured_sopc.ptfbut having this

root@ubuntu:/home/elysium/uclinux/nios2-linux/uClinux-dist# make vendor_hwselect SYSPTF=/media/96A00F1FA00F0609/altera/91/nios2eds/examples/verilog/niosII_cycloneII_2c35/full_featured/NiosII_cycloneII_2c35_full_featured_sopc.ptf

make ARCH=nios2 -C vendors vendor_hwselect

make[1]: Entering directory `/home/elysium/uclinux/nios2-linux/uClinux-dist/vendors'

make -C /home/elysium/uclinux/nios2-linux/uClinux-dist/vendors/Altera/nios2/. dir_v=/home/elysium/uclinux/nios2-linux/uClinux-dist/vendors/Altera/nios2/. -f /home/elysium/uclinux/nios2-linux/uClinux-dist/vendors/vendors-common.mak vendor_hwselect

make[2]: Entering directory `/home/elysium/uclinux/nios2-linux/uClinux-dist/vendors/Altera/nios2'

[ -d /home/elysium/uclinux/nios2-linux/uClinux-dist/romfs/$i ] || mkdir -p /home/elysium/uclinux/nios2-linux/uClinux-dist/romfs

make ARCH=nios2 CROSS_COMPILE=nios2-linux-uclibc- -C /home/elysium/uclinux/nios2-linux/uClinux-dist/../linux-2.6 O=/home/elysium/uclinux/nios2-linux/uClinux-dist/linux-2.6.x hwselect

make[3]: Entering directory `/home/elysium/uclinux/nios2-linux/linux-2.6'

GEN /home/elysium/uclinux/nios2-linux/uClinux-dist/linux-2.6.x/Makefile

scripts/kconfig/conf -s arch/nios2/Kconfig# # configuration written to .config#

include/config/auto.conf:8:warning: symbol value 'arch/x86/configs/i386_defconfig' invalid for ARCH_DEFCONFIG

include/config/auto.conf:44:warning: symbol value 'elf32-i386' invalid for OUTPUT_FORMAT

make[4]: *** No rule to make target `hwselect'. Stop.

make[3]: *** [sub-make] Error 2

make[3]: Leaving directory `/home/elysium/uclinux/nios2-linux/linux-2.6'

make[2]: *** [vendor_hwselect] Error 2

make[2]: Leaving directory `/home/elysium/uclinux/nios2-linux/uClinux-dist/vendors/Altera/nios2'

make[1]: *** [vendor_hwselect] Error 2

make[1]: Leaving directory `/home/elysium/uclinux/nios2-linux/uClinux-dist/vendors'

make: *** [vendor_hwselect] Error 2

Any suggestions, thanks