Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
9 years ago

FPGA configuration and Nios-II application software into the EPCS

Hi, I have the design where i have FPGA logic interfacing with Nios-II. I used Quartus Prime 16.1 Standard Edition. I used Cyclone-IV Device EP4CE55. I want to put the FPGA configu...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
9 years ago

Hi,

Thanks for your reply.

I used Two Nios-II in Qsys, one Nios already interfaced with EPCS Controller, but another is not. But both Nios-II systems are independent configure in a Qsys.

Nandish Jasani.