Forum Discussion
Altera_Forum
Honored Contributor
Honored ContributorCan I use 8M sdram for nios2-mmu linux?
hello, I have a custom fpga board with a ep2c20 core, a 8M cfi flash chip, a 8M sdram chip, etc.I design a smallest nios2 sopc with just a sdram controller, uart jtag and nios2-mmu with dual port ...
Altera_ForumHonored Contributor
Honored ContributorI suggest You reading this blog: http://www.grigaitis.eu/?p=698
Check SOPC builder addresses. SDRAM must be at 0x10000000 and all the other components must fit to lower addresses.
