Altera_Tse for x86

Hi there,

we want to implement an altera-tse in a linux_x86_64 OS. We use the device tree generator from rocketboard and modify the dts-file to adapt the addresses. This seems to be needed, because the pci-bar-offset is not known by the generator.

Our system is: x86 -> PCIe -> TSE -> Phy -> wide world

We can connect to the TSE-MAC and see e.g. the link-status of the phy. But we cannot reset the mac or set mac-address in the registers.

Do you have some suggestions?

Regards,

Chris