Forum Discussion

ssd00's avatar
ssd00
Icon for New Contributor rankNew Contributor
6 years ago

TRI SPEED ETHERNET MAC CONFIGURATION IN 10/100

HI friends

I would like to know if there are any example design for tri speed ethernet mac without the usage of Qsys system intergration tool for MAX 10 CPLD.

I would like to know how to configure MAC address in tri speed ethernet mac ip in 10/100 small mac variation. In the IP user guide on page 81 it is mentioned that Base configuration register is not available 10/100 small mac variation.

3 Replies

  • SengKok_L_Intel's avatar
    SengKok_L_Intel
    Icon for Regular Contributor rankRegular Contributor
    6 years ago
    Hi, The small mac variation consist of base configuration register, and the MAC address can configure at address 0x03 and 0x04. The note (1) in page 81 is referring to offset address 0x01 "scratch (1)" register Not the whole table 35. Regards -SK Lim
    • ssd00's avatar
      ssd00
      Icon for New Contributor rankNew Contributor
      6 years ago

      Thanks Lim

      I would like to know if there is any example design for 10/100 available for download without the use of the QSYS IP intergration tool available.

  • SengKok_L_Intel's avatar
    SengKok_L_Intel
    Icon for Regular Contributor rankRegular Contributor
    6 years ago

    ​Hi,

    I don't see there is a similar design for the small mac MAX 10 device.

    Regards -SK Lim