Forum Discussion

ZWang142's avatar
ZWang142
Icon for New Contributor rankNew Contributor
5 years ago

stratix hbm2 write request seems pending and blocking read requests to the same address

Device: Stratix 10 mx, 1SM16BEU2F55E2VG *** This problem happens on the real device and cannot be reproduced by simulation yet. *** HBM Settings: BL8, Controller refreshes all, Autoprecharge FORCE...
yoichiK_altera's avatar
yoichiK_altera
Icon for Contributor rankContributor
5 years ago

Hi

Are you following the correct transaction for write sequence ? When user request the write access with write address user need to write two clock cycle of write data as attached transaction.

  • ZWang142's avatar
    ZWang142
    Icon for New Contributor rankNew Contributor
    5 years ago

    Yes, sure, otherwise my simulation will catch it.

    Anyway, the problem is gone after I issue another hbm reset (the high active one).