Forum Discussion

User1573261788318367's avatar
User1573261788318367
Icon for New Contributor rankNew Contributor
6 years ago

Stratix 10 PCIe HIP ninit_done

Hi all, I've just migrated my Quartus Prime Pro project from 19.1 to 19.4 and noticed that in the newer version, the Stratix 10 PCIe HIP wants me to connect something to the "ninit_done" input signa...
BoonT_Intel's avatar
BoonT_Intel
Icon for Frequent Contributor rankFrequent Contributor
6 years ago

Hi Sir,

The ninit_done is introduced due new configuration scheme is needed in Stratix 10 device.

See the configuration handbook and diagram as below. It is better if you can include the reset IP in your design and connect the ninit_done from the reset IP to the input of the PCIe Ip.

Hope this helps.