Forum Discussion

LKrup's avatar
LKrup
Icon for New Contributor rankNew Contributor
7 years ago

PCIe device not detected after programming CVP peripheral core

I have Reflex Attila Arria 10 GX (chip is Engineering Sample) board with simple PCIe test project on which 'lspci' command shows Altera device. I proceed with instructions in ug_a10_cvp_prop.pdf and ...
LKrup's avatar
LKrup
Icon for New Contributor rankNew Contributor
7 years ago

I attached archived project which i tested it on. Can someone help?

Sorry, by accident I uploaded archived project without "device -> Device and Pin Options-> Configuration via Protocol = Core initialization" option on which I tested with.