Forum Discussion

New Contributor

4 years ago

Parallel Flash Loader doesn't recognize CFI Flash

Hi, I developed a custom hardware with Cyclone V GT and MAX10 FPGAs on board. The MAX10 has to configure the Cyclone V GT via FPP x8 mode out of a CFI-Flash device MT28EW01GABA1LPC-0SIT. Basically ...

YuanLi_S_Intel

Regular Contributor

3 years ago

Ok. What about the following? Can you check and see?

https://www.intel.com/content/www/us/en/programmable/quartushelp/13.0/mergedProjects/msgs/msgs/epgme_device_siid_error.htm

Also, can you share me the schematic connection between flash, max 10 and FPGA? You can share me via private message.

Forum Discussion

Parallel Flash Loader doesn't recognize CFI Flash

Recent Discussions

Connecting Intel Agilex FPGA to DE1-SoC via Hub

AGILEX 7 Series I/M – CXL Type 3 IP Validation with Granite Rapids

Regarding MIPI CSI 2 TX

Cyclone 10GX PCIe / Raspberry Pi

Constraints not being picked for DCFIFO