Forum Discussion

EGrün's avatar
EGrün
Icon for New Contributor rankNew Contributor
4 years ago

Parallel Flash Loader doesn't recognize CFI Flash

Hi, I developed a custom hardware with Cyclone V GT and MAX10 FPGAs on board. The MAX10 has to configure the Cyclone V GT via FPP x8 mode out of a CFI-Flash device MT28EW01GABA1LPC-0SIT. Basically ...
YuanLi_S_Intel's avatar
YuanLi_S_Intel
Icon for Regular Contributor rankRegular Contributor
4 years ago

hi, just want to clarify. You were testing with 2 PFL design (your own design & design adopted from our development kit) right? What about the PFL design from the development kit? is it working fine?


  • EGrün's avatar
    EGrün
    Icon for New Contributor rankNew Contributor
    4 years ago

    Hi,

    Yes I tested with 2 PFL designs as mentioned above. Both designs dosn't work. Both designs have the same behavior as I mentioned at paragraphs 1.) and 2.).