Forum Discussion

ZaidSahawneh's avatar
ZaidSahawneh
Icon for New Contributor rankNew Contributor
2 years ago

No link with 10G Low Latency

I've been modifying my project from 40G ethernet to use the Intel 10G LL MAC. I removed the old MAC, and inserted the generated project for the 10G LL MAC into the design but when I connect a fiber f...
Ethernet
ZaidSahawneh's avatar
ZaidSahawneh
Icon for New Contributor rankNew Contributor
2 years ago

UPDATE:

The TX Path seems to be stuck in reset. This has been confirmed using Signal Tap. I connected the reset request signals for TX and RX. initiating a RX reset appears to work perfectly fine. TX seems to be in reset indefinitely. Initiating my own reset doesn't change this. Not sure why this is occurring.