Forum Discussion

RobAMT's avatar
RobAMT
Icon for New Contributor rankNew Contributor
5 years ago
Solved

Legacy IIR Filter IP file(s)

I am updating an ACEX 1K hardware design to a MAX10 FPGA. This design was created using Altera IIRFilter Megafunction wizard and have the original .tdf file created by the tool (see attached as .txt...
  • CheepinC_altera's avatar
    CheepinC_altera
    5 years ago

    Hi,


    As I understand it, these two are different device families and based on my experience, generally we would not be able to directly port over design files from one family to another. It is recommended for you to re-instantiate a new FIR II instance in Max 10 device following your previous configuration.


    Please let me know if there is any concern. Thank you.



    Best regards,

    Chee Pin


CheepinC_altera's avatar
CheepinC_altera
Icon for Regular Contributor rankRegular Contributor
5 years ago

Hi,


As I understand it, these two are different device families and based on my experience, generally we would not be able to directly port over design files from one family to another. It is recommended for you to re-instantiate a new FIR II instance in Max 10 device following your previous configuration.


Please let me know if there is any concern. Thank you.



Best regards,

Chee Pin


  • RobAMT's avatar
    RobAMT
    Icon for New Contributor rankNew Contributor
    5 years ago

    Thanks. I will create a FIR II filter that targets the MAX10 device.