Forum Discussion

TBaki's avatar
TBaki
Icon for New Contributor rankNew Contributor
5 years ago

I am using cyclone III FPGA with Quartus 10.0 spl software. In my design I am using ALTFP-DIV ( 32-bit single precision FP) mega-function. I want to simulate the IP that I generated. I couldn't see any simulation file. Please, can you help me to generate

TBaki's avatar
TBaki
Icon for New Contributor rankNew Contributor
5 years ago

I mean to say the simulation files of the generated IP core. Example, I generated MULTIPLIER for my design. I wanted the simulation files associated with the IP core to do simulation? rather than simulation netlist

RichardT_altera's avatar
RichardT_altera
Icon for Super Contributor rankSuper Contributor
5 years ago

Unfortunately this is in Legacy Parameter Editor, you need to use the Quartus II Nativelink feature to automatically generate simulation files and scripts.