How do I connect Verilog modules I created with ARM processor (HPS) of Cyclone V SOC ?

Question

I have created Verilog modules for my projects. I want to interface them with ARM HPS of Cyclone V SOC. Do I need to convert them to Avalon MM Master/slave ?

If you have any Design guides, tutorials please suggest.

eberlazare_i_intel · Answer

Hi,We have a tutorial for a DE-10 nano (Cyclone V), here you will learn to compile Verilog code, make pin assignments, create timing constraints, and then program the FPGA to blink one of the eight green user LEDs on the board:https://software.intel.com/en-us/articles/how-to-program-your-first-fpga-deviceIt is a simple exercise to get you started using the Quartus software for FPGA development.

Forum Discussion

How do I connect Verilog modules I created with ARM processor (HPS) of Cyclone V SOC ?

1 Reply

Recent Discussions

Behavior of 10 GX Avalon-MM Interface for PCI Express* IP Core when byteenable=16'h0000

Regarding MIPI CSI 2 TX

How to Prevent Agilex 7 F-tile PMA Direct PHY TX Lane Skew

Agilex 7 R-Tile CXL Type-2 IP Hang with Incomplete CXL.cache Operations

Regarding the TX settings of MIPI CSI2 IP