Forum Discussion

BIdro's avatar
BIdro
Icon for Occasional Contributor rankOccasional Contributor
6 years ago

Hi, I'm using the SDI_II_Intel_FPGA IP in Quartus 18.1. Does Cyclone 10 support DUAL LINK HD SDI mode? Thanks

​I found in the IP's datasheet that CYCLONE 10 GX does not support the standard DUAL LINK HD-SDI, but in the support web page ( https://www.intel.com/content/www/us/en/programmable/products/intellec...
CheepinC_altera's avatar
CheepinC_altera
Icon for Regular Contributor rankRegular Contributor
6 years ago

Hi,

Just to update you that I have managed to have discussion with Factory. For your information, it is recommended for you to refer to the user guide. The C10GX SDI II IP does not support the Dual Link HD SDI. I will feedback to our web team to update the web table accordingly. Sorry for the confusion and inconvenience.

Please let me know if there is any concern. Thank you.

Best regards,

Chee Pin