Forum Discussion

Icon for New Contributor rank

New Contributor

6 years ago

Flash 加载问题

Hi你好, 在配置外部256M 第三方flash的时候, 选择epcq256进行jic加载会到98%停止并出错, 但是用nios的flash programmer烧sof+elf正常. error code: 209025,读silicon id出错同工程之前用的epcs128烧写jic正常,但是后来需要加初始化配置所以不够大,所以换成256M的. 请问,这两种加载应该都要读silico...

Icon for Frequent Contributor rank

Frequent Contributor

6 years ago

Hi BJian12,

I believe you want to program the 3rd-party flash device.

I recommend you to use Generic Flash Programmer to load an FPGA configuration bitstream file into a Quad SPI flash memory device.

Quartus Prime supported:

Intel® Quartus® Prime Pro Edition 19.1 version onwards
Intel® Quartus® Prime Standard Edition 18.1.1 version onwards

User Guide:

Intel® Quartus® Prime Pro Edition = https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/ug/ug-qpp-gen-flash-programmer.pdf
Intel® Quartus® Prime Standard Edition = https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/ug/ug-qps-gen-flash-programmer.pdf

Cheers