E-Tile Transceiver PHY Agilex data rate is 10G, but hssi_ehip_lane_ehip_rate is rate_25gx1

Hello,I configured the E-Tile Transceiver PHY Agilex7 IP ; and the Transceiver configuration rules is Gearbox 64/66 ;mode is TX/RX Duplex. TX and RX PMA data rate is 10312.5Mhz; PMA reference clock freq is 156.25Mhz. but generate the HDL ,the .v hssi_ehip_lane_ehip_rate parameter is "rate_25gx1",not "rate_10gx1". When connecting to a 10g network, the receiver of the other party cann't receive right data.