Forum Discussion

HamzahS's avatar
HamzahS
Icon for New Contributor rankNew Contributor
4 years ago
Solved

Cyclone 10 GX External Memory Interface (EMIF) Toolkit Issue

Hello, I'm using the Quartus Prime Pro 20.4.0 and Cyclone 10 GX development board to debug the DDR3 memory using the EMIF Toolkit. I want to do this to prepare to do it in the custom board we made...
  • HamzahS's avatar
    HamzahS
    4 years ago

    Hi Adzim,

    I just found out the issue. It was because I didn't add an EMIF Debug Interface port in the IP parameters/Diagnostic tap. Sorry for missing this part.

    Thanks for your help and the quick support.

    -Sulaiman

AdzimZM_Altera's avatar
AdzimZM_Altera
Icon for Regular Contributor rankRegular Contributor
4 years ago

Hi Sulaiman,


Maybe you can share the pin assignment or the .qar of the example design so that I can check the connection.


Thanks,

Adzim


HamzahS's avatar
HamzahS
Icon for New Contributor rankNew Contributor
4 years ago

Dear Adzim,

Sorry for the rush, but we are currently being held by this issue. Have you reached any conclusion?

Thanks,

-Sulaiman