Forum Discussion

PDone's avatar
PDone
Icon for Occasional Contributor rankOccasional Contributor
5 years ago
Solved

Cannot Simulate FIR II in VHDL

I used both Quartus 18.1 and 20.1 to create a FIR II IP in VHDL. Most of the files created are VHDL, but there is one file, altera_avalon_sc_fifo.v that is Verilog. I am simulating with Active HDL 1...
  • CheepinC_altera's avatar
    CheepinC_altera
    5 years ago

    Hi,


    Glad to hear that it is working. For your information, the Modelsim Intel FPGA Starter Edition has lower performance than Modelsim Intel FPGA Edition which requires license. You can also use Modelsim SE for better performance.


    Please let me know if there is any concern. Thank you.



    Best regards,

    Chee Pin



CheepinC_altera's avatar
CheepinC_altera
Icon for Regular Contributor rankRegular Contributor
5 years ago

Hi,


I believe the initial inquiry has been addressed. This thread will be transitioned to community support. If you have a new question, feel free to open a new thread to get the support from Intel experts. Otherwise, the community users will continue to help you on this thread. Thank you.


  • PDone's avatar
    PDone
    Icon for Occasional Contributor rankOccasional Contributor
    5 years ago

    The problem that Intel MUST fix is in the IP. When VHDL models are generated, they must include VHDL modules only, no Verilog sub modules at all so that it can be simulated in a VHDL only environment. Using ModelSim - INTEL FPGA STARTER EDITION, which allows dual language simulation allows me to simulate this part of my design separately but it is to limited for me to do a full chip simulation. It is not worth it for us to purchase an additional Verilog Active-HDL license to simulate this one design.