Forum Discussion
NYao
New Contributor
New ContributorCan HDMI2.1 be implemented using Arria 10 -3 grade FPGA?
Dear, I know we have HDMI2.1 demo using A10 development kit, can i using this IP on -3 grade devices? like 10AX027H4F34I3G?
Hi, It is recommended to use Arria 10 FPGA device with speed grade 2 or faster. You might facing timing issue if you use Speed grade -3
https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/ug/ug_hdmi.pdf#page=15
BoonT_Intel
Frequent Contributor
Frequent ContributorHi, It is recommended to use Arria 10 FPGA device with speed grade 2 or faster. You might facing timing issue if you use Speed grade -3
https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/ug/ug_hdmi.pdf#page=15
NYaoHi BoonT，
Thanks.
How about -2LG？I want to use 10AX066H3F34I2LG.
