Forum Discussion

SKuma36's avatar
SKuma36
Icon for Occasional Contributor rankOccasional Contributor
7 years ago

Arria10 PCIe Hard IP link bring up issue

Hi, We are trying to bring-up PCIe (Gen1 x1) interface using Arria 10 PCIe Hard IP on Intel's Arria10 Signal Integrity development board. The design is found to be working in simulation, but on the...
SKuma36's avatar
SKuma36
Icon for Occasional Contributor rankOccasional Contributor
7 years ago
Hi SK, Our design works fine for the external loopback with the channel connected to 2.4 SMA connector. For the channel connected to High Density bulls eye connector, it’s not working. As suggested, we will try to use a scope and see if we could see data on TX lines. Rgds, sunil