Forum Discussion

RZhen11's avatar
RZhen11
Icon for Occasional Contributor rankOccasional Contributor
2 months ago

Arria 10 Transceiver rx_cal_busy always HIGH for 24s after programming

Troubleshooting 10G link native, the external TX is always ON. USRCLK 100MHz always ON. Every time the FPGA is loaded through JTAG or cold boot, there is a 24sec something wait until rx_clk_busy goe...
Transceiver
Ash_R_Altera's avatar
Ash_R_Altera
Icon for Regular Contributor rankRegular Contributor
2 months ago

Dear Customer,

I assume that your issue is resolved. If there are no further inquiries the community will be able to assist with any future follow-up questions.

Thank you for engaging with us!

Best regards,
Altera Technical Support