CLeon14
New Contributor
New ContributorArria 10 PCIE lane reversal
From my understanding on the PCIE user guide. The PCIE IP supporting lane reversal. But I can't see the setting in the IP gui. Is it the lane reversal is done automatically?
https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/ug/archives/ug-01145_avmm-1_0.pdf
Hi Chee Leong,
By referring to page 161 in the following link, the PHY layer implementing auto lanes reversal, no setting in the IP GUI is needed as I can see.
https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/ug/ug_a10_pcie_avmm.pdf
Regards -SK
