Forum Discussion

IKovr1's avatar
IKovr1
Icon for New Contributor rankNew Contributor
6 years ago

Arria 10 DDR4 SODIMM calibration fails occasionally. How to remove this bug?

We have 2 Banks DDR4 SODIMM on our board connected to 10AX115H3F34E2SG. After Arria10 configuration we start Calibration process for both memory banks. For Menory Bank A calibration always pass, but ...
sstrell's avatar
sstrell
Icon for Super Contributor rankSuper Contributor
6 years ago

Make sure you run the DDR timing report in the Timing Analyzer to verify that you are meeting timing. This sounds like a potential timing issue.

#iwork4intel