Forum Discussion
akohlsmith
New Contributor
New ContributorALTPLL on MAX10 is choosing out-of-spec 500MHz VCO Freq?
I have a design where I have an incoming 125MHz clock that I'm feeding to a PLL. The 10M25 IP configuration for the PLL is largely automatic, but is choosing a VCO frequency of 500MHz, which is out o...
Rahul_S_Intel1
Frequent Contributor
Frequent ContributorHi,
May I know with out touching the VCO frequency are you getting the expected out put.
akohlsmithNew Contributor
New ContributorNo, the PLL does not lock.
